Incident at SASKATOON / JOHN G. DIEFENBAKER INTL SK (CYXE)

Summary

2003-03-06: UPDATE TSB reported that the British Aerospace Jetstream 3112 operated by West Wind Aviation as flight WEW 300, was on the takeoff run when the crew observed that the left engine (Garrett TPE331) RPM did not increase above 98 percent. The takeoff was rejected at about 100 knots and the aircraft returned to the apron. Company maintenance adjusted the fuel control unit, carried out ground runs, and the aircraft was returned to service.
2003-03-04: WEW 300, a BAe 31, was departing Saskatoon for La Ronge when the crew rejected the takeoff. The crew taxied off the runway to the company hangar. The cause of the incident is not known. TSB will contact the company.

Details


CADORS Number 2003C0293
Occurrence Type Incident
Reported By NAV CANADA
Occurred At 2003-03-04 - 15:06
Day or Night? Day-time
Fatalities 0
Injuries
Aerodrome ID CYXE
Aerodrome Name SASKATOON / JOHN G. DIEFENBAKER INTL SK (CYXE)
Geographic Location Saskatchewan, Canada, North America, Prairie and Northern Region, Saskatoon
TSB Occurrence Number A03C0064
TSB Class of Investigation Class 5
AOR Number 27982
Reported By NAV CANADA
Categories System/component failure or malfunction [powerplant],Abrupt manoeuvre
Events



Aircraft Details (1 aircraft)

Type Aeroplane
 Silhouette image of Aeroplane
Canadian Registration FCPD | Flightaware (Registration) | Flightaware (Tracking) | AvHerald
Foreign Registration
Country of Registration Canada
Occurrence Type Incident
Owner WEST WIND AVIATION LIMITED PARTNERSHIP, BY ITS GENERAL PARTNER, WEST WIND M (ANAGEMENT LTD
Operator WEST WIND AVIATION INC. (4567) Commercial
Make  Silhouette image of BRITISH AEROSPACE
BRITISH AEROSPACE
Model 3112
Year Built 1988
Engine Type Turbo prop
Engine Make  Silhouette image of GARRETT
GARRETT
Engine Model TPE331-10UGR
Gear Type Land
Private No
Amateur Built No
Flight Number WEW 300
Flight Rule
CARS Subpart
Phase of Flight Takeoff
Damage No Damage
Fatalities 0
Injuries 0
Events Rejected take-off,Engine - malfunction

Leave a Comment